Shiba Inu Dog

Difficulty Level: intermediate

Crochet Lalafanfan-style Shiba Inu amigurumi dog

Free Shiba Inu Dog crochet pattern by @tatyana.toys.

With this pattern, you can crochet a plush Lalafanfan-style Shiba Inu dog. You can use any plush yarn for this amigurumi, including Himalaya Dolphin Baby, YarnArt Dolce, Kamtex Velour, or a similar yarn. The tutorial also includes instructions for knitting a sweater and crocheting a bag and headband.

The finished toy is about 26 cm (10.2 in) tall.

Materials and tools

  • Himalaya Dolphin Baby yarn: 80325 gray (1 skein), 80301 white (small amount)
  • YarnArt Jeans yarn: 74 pink (for the sweater)
  • 1.75 mm, 2 mm, and 4 mm crochet hooks
  • 3 mm knitting needles
  • 14-16 mm safety eyes
  • 18x14 mm safety nose
  • Fiberfill
  • 10-12 mm button (for the bag)
  • 3 buttons (for the sweater)
  • 2 mm wire
  • Needle
  • Scissors

Abbreviations

  • MR — magic ring
  • ch — chain stitch
  • sl st — slip stitch
  • sc — single crochet
  • hdc — half double crochet
  • inc — increase
  • dec — decrease
  • (...) x n — repeat n times

Crochet Lalafanfan-style Shiba Inu amigurumi dog pattern

This amigurumi is based on the Lalafanfan duck.

Crochet Lalafanfan-style Shiba Inu amigurumi dog

Arms (make 2)

Rnd 1: 6 sc in MR
Rnd 2: 6 inc (12)
Rnd 3: (3 sc, inc) x 3 (15)
Rnds 4-8: 15 sc (5 rounds)
Rnd 9: (3 sc, dec) x 3 (12)
Rnd 10: (4 sc, dec) x 2 (10)

Stuff very lightly, filling only the lower part of the arm. Fold it in half and crochet through both layers with 5 sc. Fasten off and cut the yarn.

Legs, body, and head

Rnd 1: 6 sc in MR
Rnd 2: 6 inc (12)
Rnd 3: (3 sc, inc) x 3 (15)
Rnds 4-8: 15 sc (5 rounds)

On the first leg, make a sl st and cut the yarn. Continue crocheting from the second leg:

Rnd 9: Ch 1, join the legs with a sl st, then work 15 sc around one leg, 1 sc in the ch, 15 sc around the second leg, 1 sc in the ch (32)
Rnd 10: (14 sc, 2 inc) x 2 (36)
Rnd 11: (5 sc, inc) x 6 (42)
Rnd 12: (6 sc, inc) x 6 (48)
Rnds 13-15: 48 sc (3 rounds)
Stuff the legs. You can crochet the tail into Round 13 or sew it on later.
Rnd 16: (14 sc, dec) x 3 (45)
Rnd 17: (13 sc, dec) x 3 (42)
Rnd 18: (12 sc, dec) x 3 (39)
Rnd 19: (11 sc, dec) x 3 (36)
Rnd 20: (4 sc, dec) x 6 (30)
Rnd 21: 30 sc
Rnd 22: (3 sc, dec) x 6 (24)

Join the arms in the next round. Position them directly on the sides of the body and crochet through the arms and body together as you work around.

Rnd 23: (2 sc, dec) x 6 (18)
Rnd 24: 18 inc (36)
Rnd 25: (2 sc, inc) x 12 (48)
Rnd 26: (7 sc, inc) x 6 (54)
Rnd 27: (8 sc, inc) x 6 (60)
Rnds 28-36: 60 sc (9 rounds)
Stuff the body.
Rnd 37: (8 sc, dec) x 6 (54)
Rnd 38: (7 sc, dec) x 6 (48)
Rnd 39: (6 sc, dec) x 6 (42)
Rnd 40: (5 sc, dec) x 6 (36)
Rnd 41: (4 sc, dec) x 6 (30)

Insert the eyes between Rounds 31 and 32, leaving 7 sc between them. Stuff the head into a round shape. Stuff the neck especially firmly.

Rnd 42: (3 sc, dec) x 6 (24)
Rnd 43: 12 dec (12)
Rnd 44: 6 dec (6), sl st

Finish stuffing the head. Cut the yarn and cinch the remaining stitches closed. Fasten off and weave the end inside.

Ears (make 2)

For each ear, make two identical pieces: one in white and one in gray. Cut the yarn on the white piece. Do not cut the yarn on the gray piece; use it to join the pieces.

Row 1: Ch 2, work 3 sc in the 2nd ch from the hook
Row 2: Ch 1, turn, 3 inc (6)
Row 3: Ch 1, turn, 1 sc, inc, 2 sc, inc, 1 sc (8)
Row 4: Ch 1, turn, 8 sc
Row 5: Ch 1, turn, 8 sc

Place the two pieces together with the white piece on top. Crochet through both pieces with sc. Work 2 sc at the beginning, at the tip, and at the end. Sew the ears to the center of the head, leaving 5-6 sc between them. Curve the ears slightly as you sew them on.

Crochet Lalafanfan-style Shiba Inu amigurumi dog: ears and muzzle

Muzzle patches (make 2)

Rnd 1: 6 sc in MR
Rnd 2: 6 inc (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: 1 sc, inc, (2 sc, inc) x 5, 1 sc (24)
Rnd 5: 3 sc, 6 hdc, 6 sc, 6 hdc, 3 sc (24), sl st

Leave a long yarn tail and use it to sew the pieces on with white cotton yarn.

Snout

Rnd 1: 6 sc in MR
Rnd 2: 6 inc (12)
Rnd 3: (3 sc, inc) x 3 (15)
Rnds 4-5: 15 sc (2 rounds)

Fasten off, leaving a tail for sewing. Insert the black safety nose between Rounds 2 and 3. Embroider small lines on the snout with black yarn.

Tail

Ch 5. Starting in the 2nd ch from the hook, work 4 sc, ch 1, turn, 3 sc, sl st, then continue working sl sts around to the end of the row. Fasten off, leaving a tail for sewing.

Assembly

Sew the ears to the center of the head, leaving 5-6 stitches between them. Curve the ears slightly as you sew. Sew the tail to the center back at Round 13. Sew the two identical muzzle patches side by side directly below the eyes. Add a small amount of stuffing. Sew the snout above them, centered between the eyes, adding stuffing as you sew. Using two strands of white plush yarn held together, embroider the eyebrows.

Sweater

Use 3 mm knitting needles.

  • edge — edge stitch
  • K — knit
  • P — purl
  • raglan — YO, K1, YO
  • stockinette stitch — alternate one knit row and one purl row

On wrong-side rows, purl each YO through the back loop to avoid holes. Cast on 53 stitches.

Row 1: P53
Row 2: 1 edge, K8, raglan, K8, raglan, K15, raglan, K8, raglan, K8, 1 edge (61)
Row 3: 1 edge, P59, 1 edge (61)
Row 4: 1 edge, K9, raglan, K10, raglan, K17, raglan, K10, raglan, K9, 1 edge (69)
Row 5: 1 edge, P67, 1 edge (69)
Row 6: 1 edge, K10, raglan, K12, raglan, K19, raglan, K12, raglan, K10, 1 edge (77)
Row 7: 1 edge, P75, 1 edge (77)
Row 8: 1 edge, K11, raglan, K14, raglan, K21, raglan, K14, raglan, K11, 1 edge (85)
Row 9: 1 edge, P83, 1 edge (85)
Row 10: 1 edge, K12, raglan, K16, raglan, K23, raglan, K16, raglan, K12, 1 edge (93)
Row 11: 1 edge, P91, 1 edge (93)
Row 12: 1 edge, K14, bind off 18 stitches, K25 (there will be 26 stitches on the needles), bind off 18 stitches, K13, 1 edge (56)
Row 13: 1 edge, P14, cast on 5 stitches, P26, cast on 5 stitches, P14, 1 edge (66)
Rows 14-29 (16 rows): 1 edge, work in stockinette stitch, 1 edge (66)

You can knit the last 3-5 rows to create an attractive garter-stitch border. Adjust the sweater length by working more or fewer rows.

Row 30: Bind off all stitches. Add snaps.

If you want button and buttonhole bands, knit the first 3 stitches after the edge stitch and the last 3 stitches before the edge stitch on every row. Make buttonholes in approximately Rows 2, 14, and 26 by knitting the last 2 stitches before the edge stitch together, then making a YO. On the next row, knit this YO.

Crochet Lalafanfan-style Shiba Inu amigurumi dog: headband, bag, and glasses

Bag

Use a 1.75 mm crochet hook.

Ch 15. Starting in the 2nd ch from the hook, work 14 sc, then work 14 sc along the other side of the chain. Continue crocheting in the round for 10 rounds, working 28 sc per round. Finish at one corner of the bag. Ch to the desired strap length (70 ch for the sample). Join with a sl st to the opposite corner of the bag. Working back along the chain, crochet 70 sc and join to the bag with a sc.

Next, work the flap back and forth in rows:

Row 1: 13 sc
Rows 2-4: Ch 1, turn, 13 sc
Row 5: Ch 1, turn, starting in the 2nd sc, work 10 sc, dec
Row 6: Ch 1, turn, starting in the 2nd sc, work 8 sc, dec
Row 7: Ch 1, turn, starting in the 2nd sc, work 6 sc, dec
Row 8: Ch 1, turn, starting in the 2nd sc, work 4 sc, dec
Row 9: Ch 1, turn, starting in the 2nd sc, work 2 sc, dec
Row 10: Ch 1, turn, starting in the 2nd sc, work 1 dec

Edging the flap: work 10 sc along one side of the flap, then work slip stitches across the front of the bag, followed by 10 sc along the other side of the flap, sl st. Fasten off and weave in the end. Sew on the button. Put the bag on the toy by sliding it up over the legs.

Headband

Ch enough stitches to fit around the head (92 ch for the sample), then join in the round, making sure the chain is not twisted.

Crochet in the round to the desired width (14 rounds for the sample), sl st. The band is 4.5 cm (1.8 in) wide and 17.5-18 cm (6.9-7.1 in) long when folded in half.

Make the bow strip the same way, but shorter (70 ch and 14 rounds for the sample). The main band and bow strip should be the same width: 4.5 cm (1.8 in).

The bow strip is 12-13 cm (4.7-5.1 in) long when folded in half.

Next, make the center wrap for the bow. Ch 16. Starting in the 2nd ch from the hook, work 15 sc, ch 1, turn. Work back and forth for 6-7 rows. The center wrap should measure 2.5 x 6 cm (1 x 2.4 in). Leave a long tail for sewing.

Fold the bow strip in half and place it on top of the main headband. Shape the bow, wrap the center piece around both the bow and one layer of the headband, and sew it together on the wrong side.

Glasses

I made the glasses myself, but you can use ready-made round glasses if you have them. I used 2 mm wire and followed a YouTube video tutorial. Search YouTube for “how to make wire glasses for toys.” Each lens on my glasses is 5 cm (2 in) in diameter.